Garden Shed Skylight
Lowest price with delivery – order now!
FROM $83
Bring natural light into your Absco shed with a translucent fibreglass skylight sheet. The skylight installs over two steel roof sheets, allowing daylight to enter while remaining integrated within the roof panel.
Measuring 330mmW × 1610mmL, the sheet can be cut to a shorter length using ordinary household scissors where required.
- Natural Light: Allows daylight to filter through the roof and brighten the inside of your shed.
- Fibreglass Sheet: A translucent roof sheet designed for installation with Absco steel roof panels.
- Adjustable Length: Can be trimmed to a shorter length where required for installation.
- Warranty: Covered by a 10-year accessory warranty.
Plan your installation
Refer to the Roof Panel Assembly section of your shed instruction manual before installing the skylight.
- Place the skylight over two steel roof sheets and secure it with eight screws.
- Overlap the adjoining roof sheet by two pan widths and secure it with eight screws.
- Installing the skylight alters the position of the existing pre-punched roof holes. Carefully drill additional 3mm holes where required.
- Drill slowly to avoid damaging or enlarging the holes in the fibreglass.
- Do not overtighten the screws, as this may crack the skylight sheet.
- Position the skylight at least 450mm from the shed end wall.
- On larger workshop or utility models, position it at least 450mm from the portal frame
Specification
Size:
Roof Type:
SKU: SKYSH
Door/s:
Door Type:
Style:
Colour:
Warranty: 10 Year Warranty
Wind Rating:
Anchors Required:
Instruction Manual
Assembly
Absco Sheds are designed for easy assembly with the patented SNAPTiTE® system, which locks panels together without extra screws. Kits include all parts, fixings and come with pre-punched holes and labelled parts, with step-by-step manuals and assembly videos available via the free Absco Assembly App.
All sheds are DIY flat-pack kits (no base or floor included) and are recommended to be anchored to a concrete slab for warranty purposes. Anchors may be purchased separately - some models include them.
For best results, allow a weekend, have at least two people for assembly, and use trestles/timber to work at waist height. Watching the assembly videos before starting will make the process smoother and faster.
Frequently Asked Questions
Where are Absco products made?
All Absco Sheds are manufactured in Brisbane, Queensland, Australia using high-tensile, chromium free BlueScope steel.
How hard is it to put together an Absco Shed?
Absco Sheds use the patented SNAPTiTE Assembly System. SNAPTiTE is the world’s fastest assembly system as it uses up to 75% less screws than competitors sheds. With the SNAPTiTE Assembly System & pre-drilled holes, Absco Sheds assemble up to 80% faster than competitor sheds. Using our instructional videos on the Absco App and YouTube channel, you should have your shed up in no time.
How long does it take to install an Absco Shed?
Depending on the level of experience that the installer has, an Absco 3 x 3 metre shed will take 1–2 days with 2–4 people. This is an estimate only and should be used as a guideline. Large structures will take longer to assemble.
Are Absco Sheds suited to high wind areas?
Most Absco sheds are rated N2. Cyclone Kits are available for some models that upgrade the product to C1. Please check the wind rating in the product descriptions.
Does my shed come with a floor?
No, your shed doesn’t come with a floor. All sheds need to be secured to a rebated concrete slab for it to be valid under warranty.
Does my shed require council approval?
Normally sheds and structures above 10 metres squared do require council approval, however this may vary based on your council. Please check with your local council before ordering.
Explore More Frequently Asked Questions
Choose options