Garden Shed Sliding Perspex Window
Lowest price with delivery – order now!
FROM $194
Bring natural light and ventilation into your Absco garden shed with the Sliding Perspex Window. The sliding design can be opened to improve airflow while allowing daylight into the shed.
The window is suitable for selected Absco sheds measuring at least 2.26m wide or deep. The installation position must have at least one full wall sheet on either side, and the top of the wall panel must be flat. It cannot be fitted to angled wall sheets.
Assembled window size: 750mmW x 250mmH
- Natural light: Helps brighten the inside of your shed during the day.
- Ventilation: Open the window to allow fresh air to flow through your shed.
- Warranty: Covered by a 10-year accessory warranty.
Included with this window
- 2 acrylic sheets
- 2 x 250mm plastic tracks
- 2 x 750mm plastic tracks
- 4 corner joiner angles
- 12 pop rivets
Check compatibility before purchasing
The Sliding Perspex Window requires:
- A shed measuring at least 2.26m wide or deep
- One full wall sheet on each side of the installation position
- A centre wall sheet with a flat top, not suitable for angled sheets
Always check the instruction manuals for both your shed and the Sliding Perspex Window before purchasing.
Plan your installation
Installation requires a 225mm section to be cut from the top of a centre wall sheet. The assembled window is then fitted into position and secured to the sheet ribs with the supplied pop rivets. Based on the installation sequence, it is best fitted while the shed wall panels are being assembled.
Frequently asked questions
Will this window fit every Absco shed?
No. The shed must meet the minimum size and wall-panel requirements outlined above. Always check the relevant instruction manuals to confirm compatibility.
Can it be installed on an angled wall sheet?
No. The top of the wall panel must be flat so the window can be fitted correctly.
Does the wall sheet need to be modified?
Yes. Installation requires a 225mm section to be cut from the top of a centre wall sheet.
What size is the window?
The assembled window measures 750mm wide x 250mm high.
Specification
Size:
Roof Type:
SKU: SLPW
Door/s:
Door Type:
Style:
Colour:
Warranty: 10 Year Warranty
Wind Rating:
Anchors Required:
Instruction Manual
Assembly
Absco Sheds are designed for easy assembly with the patented SNAPTiTE® system, which locks panels together without extra screws. Kits include all parts, fixings and come with pre-punched holes and labelled parts, with step-by-step manuals and assembly videos available via the free Absco Assembly App.
All sheds are DIY flat-pack kits (no base or floor included) and are recommended to be anchored to a concrete slab for warranty purposes. Anchors may be purchased separately - some models include them.
For best results, allow a weekend, have at least two people for assembly, and use trestles/timber to work at waist height. Watching the assembly videos before starting will make the process smoother and faster.
Frequently Asked Questions
Where are Absco products made?
All Absco Sheds are manufactured in Brisbane, Queensland, Australia using high-tensile, chromium free BlueScope steel.
How hard is it to put together an Absco Shed?
Absco Sheds use the patented SNAPTiTE Assembly System. SNAPTiTE is the world’s fastest assembly system as it uses up to 75% less screws than competitors sheds. With the SNAPTiTE Assembly System & pre-drilled holes, Absco Sheds assemble up to 80% faster than competitor sheds. Using our instructional videos on the Absco App and YouTube channel, you should have your shed up in no time.
How long does it take to install an Absco Shed?
Depending on the level of experience that the installer has, an Absco 3 x 3 metre shed will take 1–2 days with 2–4 people. This is an estimate only and should be used as a guideline. Large structures will take longer to assemble.
Are Absco Sheds suited to high wind areas?
Most Absco sheds are rated N2. Cyclone Kits are available for some models that upgrade the product to C1. Please check the wind rating in the product descriptions.
Does my shed come with a floor?
No, your shed doesn’t come with a floor. All sheds need to be secured to a rebated concrete slab for it to be valid under warranty.
Does my shed require council approval?
Normally sheds and structures above 10 metres squared do require council approval, however this may vary based on your council. Please check with your local council before ordering.
Explore More Frequently Asked Questions
Choose options